LED flasher problems

Mike-Presley · Post by **Mike-Presley** » Tue Mar 05, 2013 3:19 am

I'm using led tail lights and front flashers, a signalstat 900 switch with a 263 electronic flasher. The turn signals just stay on and don't flash. Any suggestions?

DIESELDOOG · Post by **DIESELDOOG** » Tue Mar 05, 2013 5:37 am

There might not be enough resistence in the LED to allow the flasher to cycle, try an LED type flasher

manxdavid · Post by **manxdavid** » Tue Mar 05, 2013 2:40 pm

I used a motorcycle led type flasher, I just cut the little nylon connector block of and replaced with regular crimp type connectors.

GotManx · Post by **GotManx** » Tue Mar 05, 2013 6:48 pm

Like Joe said. There are plenty of LED flashers relays out there now. I've use something similar to this before:

http://www.ebay.com/itm/Turn-Signal-Ind ... es&vxp=mtr

Mike-Presley · Post by **Mike-Presley** » Fri Mar 08, 2013 11:42 pm

Local parts guys kept telling me to use their electronic flasher. Didn't work. I got a "LED" flasher online and it works perfect.