RV Holding Tank Repair

Ed-Chenal · Post by **Ed-Chenal** » Thu Feb 27, 2014 8:35 pm

I posted this information about four years ago but it's worth repeating for those who may have missed it.
I became aware of this product (Plasti-Mend) when the blackwater holding tank on the RV was going to need replacement due to a 8" long crack in the bottom. I had tried all the glues and epoxy products on the market with poor results. The Plasti-Mend provided a permanent repair to the tank at a fraction of the cost of replacing it. I also used the Plasti-Mend on the abs pipe connections to the holding tank that had become cracked over time. If you follow the instructions, it works as advertised. It is an excellent product.
http://plasti-mend.com/

jsturtlebuggy · Post by **jsturtlebuggy** » Thu Feb 27, 2014 9:58 pm

Thanks for updating the info Ed.
I have something that need repairing and this product sounds like it would work well.

Ed-Chenal · Post by **Ed-Chenal** » Fri Feb 28, 2014 7:53 pm

Joseph,
Plasti-Mend works so well on anything made of ABS, it's downright scary.