Sportster Parts

Bring your Burros, Sportsters, and other steel bodied buggies out of the corral.
Post Reply
User avatar
sandhopper2
Posts: 18
Joined: Fri Jan 30, 2015 3:53 am

Sportster Parts

Post by sandhopper2 »

Too bad this guy did not stay around I could use some parts
Well I will just have to make my own , I do have plans just the brake I have will not work for the fender I need . Modify the fender plans some maybe it will work out
User avatar
sandhopper2
Posts: 18
Joined: Fri Jan 30, 2015 3:53 am

Re: Sportster Parts

Post by sandhopper2 »

Ok I now have a 48 inch finger brake , so called plans . I would like to have someone that can draw help out with the layout of a front fender
towddude
Posts: 17
Joined: Wed Jul 30, 2014 5:18 pm

Re: Sportster Parts

Post by towddude »

Standby Sandhopper there may be new Sportster kits available soon.
ManxManiac
Posts: 200
Joined: Tue Mar 30, 2010 5:00 am
Location: Ventura, CA

Re: Sportster Parts

Post by ManxManiac »

Hey Kornoff... when is this "blessed event" suppose to take place??? LOL I met a guy this last Sunday at the big flea market here in Ventura that has 2 EMPI Sportsters & would love to be able to buy the body parts he needs, as opposed to having it made!!! He says both were actually made by EMPI & he's owned them for a long time!!! He will not sell them & plans on doing a complete restoration on both!!! Both short wheelbase, one has 66 VW Bus 1500 single-port with Bus transaxle & gear reduction boxes!!! The other has 63 Corvair swing axle rear suspension & Corvair 4 speed/3.89 R&P with posi!!!
So please let me know ASAP. Thanks.
Michael Cates
ManxManiac
#958
Ventura, CA
Original Meyers Manx "Xena"
M1609C8S22
towddude
Posts: 17
Joined: Wed Jul 30, 2014 5:18 pm

Re: Sportster Parts

Post by towddude »

Contact Dave Schaible

daveschaible@hotmail.com

Bob
Fai72721
Posts: 7
Joined: Mon Mar 14, 2022 7:42 pm

Re: Sportster Parts

Post by Fai72721 »

sandhopper2 wrote: Tue Jun 30, 2015 6:01 pm Too bad this guy did not stay around I could use some parts
Well I will just have to make my own , I do have plans just the brake I have will not work for the fender I need . Modify the fender plans some maybe it will work out
Great
Post Reply