Manxter Gas springs

The Manxter 2+2 & Dual Sport. Created as an answer to the limitations of the classic Meyers Manx.
Post Reply
BobDi-ID-1109
Posts: 8
Joined: Fri Apr 16, 2010 5:00 am

Manxter Gas springs

Post by BobDi-ID-1109 »

Does anyone know what pound rate the gas springs for the manxter's hard top are rated at? I need to replace my old ones and they are not marked....Thanks
User avatar
GotManx
Posts: 268
Joined: Mon Mar 29, 2010 5:00 am
Location: Escondido, CA

Re: Manxter Gas springs

Post by GotManx »

I replace mine a couple of years ago. They are the 30# force, McMaster-Carr part number 9416K16.
http://www.mcmaster.com/#catalog/120/1220/=r8gmt4
DIESELDOOG
Posts: 265
Joined: Thu Feb 24, 2011 6:00 am
Location: Northern Illinois

Re: Manxter Gas springs

Post by DIESELDOOG »

Bob,

Also check the edge of the connector on each end of your existing gas springs. Mine were cracked and broke off when I put the new springs in. It would have been much easier to have the new ones, instead of having to wait for another order to arrive.

Joe
dcamomanx
Posts: 89
Joined: Tue May 18, 2010 5:00 am

Re: Manxter Gas springs

Post by dcamomanx »

I was able to order a set through napa auto. They had their book all the ones available.


Doran
BobDi-ID-1109
Posts: 8
Joined: Fri Apr 16, 2010 5:00 am

Re: Manxter Gas springs

Post by BobDi-ID-1109 »

Thank you everyone for the help, springs are ordered:)
Post Reply