Manx Club

So are these Official Manx Club Calendars or are they just something you are doing on the side with the intent of passing on what you perceive as being profit to the club as a donation ? I mainly ask as it seems a bit strange to be using a personal PayPal Address if they are "Manx Club Items &...

IF ..... u are going to try and put them on a Manxter 2+2 make sure that you test fit with the radiator for sure BUT also make sure you have the engine in and mounted with the intake and TB etc on it. The clearance under the rear of the Manxter 2+2 is MUCH lower than the DS. For example my Ej Series...

Sweet, I love wires

Wow this thread is way way behind ...

Mike you should keep them up to date ... who knows it may even make Norra Mexican 1000

Engine sorted time to line up and get the body test fitted http://meyersmanx.info/ManxInfoGallery/var/resizes/Manxter-DualSport-Pictures/Manxter-DualSport-Builds/Manxter-DualSport-%23-DS-030/2016-11-05%2015_15_05.jpg Bam .. cycled, welded and ready to goto paint http://meyersmanx.info/ManxInfoGaller...

Meanwhile Chris at SubiWorks is hard at it finishing off the engine. http://meyersmanx.info/ManxInfoGallery/var/resizes/Manxter-DualSport-Pictures/Manxter-DualSport-Builds/Manxter-DualSport-%23-DS-030/2016-10-25%2013_14_05.jpg http://meyersmanx.info/ManxInfoGallery/var/resizes/Manxter-DualSport-Pict...

Once designed we built it. All USA Steel from Competitive Metals. Chassis and cage are a mix of 1020 DOm and 4130 CM. It is all tig welded. http://meyersmanx.info/ManxInfoGallery/var/resizes/Manxter-DualSport-Pictures/Manxter-DualSport-Builds/Manxter-DualSport-%23-DS-030/2016-11-05%2010_23_11.jpg Of...

Like all Meyers Manx Buggy Kits they are 100% USA Made and where designed and made by Bruce Meyers . They are assembled in Valley Center CA where they can be picked up or shipped from. http://meyersmanx.info/ManxInfoGallery/var/resizes/Manxter-DualSport-Pictures/Manxter-DualSport-Builds/Manxter-Dual...

Damn you have to many buggies ... you sure he put on a Ball Joint front ? Looks King Pin to me, either way it looks cool, you will have to take it to Baja Now so it cane be a Baja Utility How about Norra Next year

As others have said just bang it up or cut it off.

When we fit fabricated lift kits now we cut it off and but weld the floor to the lift kit so there is no over hang at all.

just ring Meyers Manx they have them in stock

was it Bruce and Winnie on their way home from the Beach Trip ?

looking good, silly question but did you do a complete mock up ? The steering shaft often busts your balls when you do setup as it needs to get from the rack to the column and the column needs to be where it needs to be in relation to the seats. I see it looks tacked so I would resist welding anythi...

When you mount the Manxter 2+2 you need to keep in mind the side bars set everything as they tie into the front beam and rear forks. We usually start by bolting them to the front beam and then sliding the body back tigh on them. Once there bolt the roll cage to the rear and then pull it down at the ...

Sweat my DSBE is looking forward to having a younger brother